| Material*(combination)(adapter/sealer rings) | Shaft Size **mm (inch) | Temperature°C (° F) | Speed m/s (ft/min) | Pressure MPa (psi) | Mating Surface(Rockwell C) | Surface Finish μm Ra (μ inch) | Recommended Use *** |
| AWC 100 (PTFE)Polyimide | 25 to 200(1 to 8) | -20 to 150 (-30 to 300) | Up to 5 (984) | Up to 1(150) | 45 | Dynamic 0,2 to 0,4 (8 to 16) Static 0,4 to 0,8 (16 to 32) | Excellent dry excellent low viscosity(<2 000 cp)powders, oil, resins, glues, paints no water or steam |
| AWC 300 (PTFE)Molybdenum & Glass | 25 to 200 (1 to 8) | -20 to 150 (-30 to 300) | Up to 5 (984) | Up to 1(150) | 55 | Dynamic 0,2 to 0,4 (8 to 16) Static 0,4 to 0,8 (16 to 32) | Excellent high viscosity (>2 000 cp)Good in dry, water, or steam |
| AWC 400 (PTFE) Carbon & Graphite | 25 to 200 (1 to 8) | -20 to 150 (-30 to 300) | Up to 5 (984) | Up to 1(150) | 55 | Dynamic 0,2 to 0,4 (8 to 16) Static 0,4 to 0,8 (16 to 32) | Excellent in water or steam good dry and low viscosity powders, asphalt, clay, slurries |
| AWC 510 Mineral (FDA listed) | 25 to 200 (1 to 8) | -20 to 150 (-30 to 300) | Up to 5 (984) | Up to 1(150) | 45 | Dynamic 0,2 to 0,4 (8 to 16) Static 0,4 to 0,8 (16 to 32) | Excellent dry good in water or steam chocolate and syrups no petroleum liquids |
* Fluoroelastomer O-Rings provided (FDA listed with AWC510).
** Please contact your Chesterton representative for larger sizes.
*** Run-out to 0,15 mm (0,05").
